Rosetta Workshop - November 5-8th


  1. Airport Transportation
  2. Driving Directions
  3. Suggested Parking
  4. Workshop Location

Airport Transportation

For those arriving by plane, we recommend flying through the Nashville International Airport (BNA).

See the Nashville International Airport Ground Transportation page for an extensive list of ground transportation options from the airport.

All major car rental companies have offices at the airport.

A cab ride from the airport runs about $20-30 and takes about 15 min, depending on the traffic.

Both Uber and Lyft operate in the Nashville area.

Driving Directions to Vanderbilt

(The following three links connect to the same official Vanderbilt site. Use the browser's back button to return to this page.)

Vanderbilt Address:

(For general GPS/mapping purposes: not the precise location of the workshop.)

Vanderbilt University
1225 Stevenson Center Ln. (Or 2213 Garland Ave.)
Nashville, TN, 37232
(615) 322-7311

Suggested Parking

On-street parking: There is limited, metered, on-street parking on Garland Ave and 24th Ave S (free after 6 pm Weekdays, all day Saturday and Sunday).

Workshop Location

The workshop will be held in the Stevenson Center Teaching Lab, room 5119, part of the Vanderbilt University Campus. The Stevenson Center is an easy ten-minute walk from the Holiday Inn or five minutes from shuttle drop-off points. See the Vanderbilt Campus Maps for the location of the building. (The teaching lab is in "SC Science & Engineering")