AMBER Archive (2007)Subject: Re: AMBER: Fwd: QM region + cutoff larger that box
From: M. L. Dodson (mldodson_at_houston.rr.com)
Date: Sat Aug 04 2007 - 09:51:22 CDT
To follow up to myself:
M. L. Dodson wrote:
> Francesco Pietra wrote:
>> Although I suspected the problem does not arise from the box size, I
>> have rerun
>> md for the eq conformer. I started from prepin used successfully for
>> the ax
>> conformer in chcl3 and for both conformers in h2o. Setting the
>> chloroform box
>> 20A and md nstlim = 20,000.
>>
>> I have reexamined the min.in and md.in, they seem to be correct.
>>
>> It bombed at step 19150 with same indication "QM part + cutoff larger
>> than
>> box". As on previous runs, the mdcrd file shows the solute correctly
>> immersed
>> in molecules, allegedly chloroform. Say "allegedly" because of what said
>> previously (below).
>>
>> Thanks
>>
>> francesco pietra
>>
>
> Well, I've had a lot of practical experience recently with the
> QMMM functionality, so let me give it a try.
>
> You say you did the run similarly to tutorial A2, but what is your
> QM region definition? If you just copied the ':1-2' mask value of
> the tutorial (first two residues), then the QM region probably
> includes one of the solvent molecules. To follow up that
> speculation, if that is what you did, then the QM CHCl3 is
> diffusing away from the solute, moving out of the box.
>
> If your mask definition is equivalent to ':1' (i.e., just the
> solute), then you must have cleaved your solute into two fragments
> (not very likely). To get a QM region component to move out of
> the QM box, the QM region must start with at least two components.
>
Actually, that may not be true. Depends on how the origin of the
QM box is determined. If it is calculated once at the start of
the run and not continually recentered, then it may be that your
solute is just diffusing out of the box. This would not be seen
with a QM region that consists of high MW solutes (at least in a
normal run). Ross or Gustavo may have to referee this.
> Please post your input file.
>
We still need this.
> No help here on your VMD problem. My experience with VMD is that
> it is very comprehensive and flexible, but you have to tell it
> EXACTLY what you want to do if your problem is different from what
> the VMD developers had in mind (and put that capability in the
> menus). I.e., it is a programming language as much as a graphics
> program.
>
> Bud Dodson
>
>>
>> --- Francesco Pietra <chiendarret_at_yahoo.com> wrote:
>>
>>> Date: Fri, 3 Aug 2007 10:02:35 -0700 (PDT)
>>> From: Francesco Pietra <chiendarret_at_yahoo.com>
>>> Subject: QM region + cutoff larger that box
>>> To: Amber <amber_at_scripps.edu>
>>>
>>> QM-MM run successfully (20,000 steps) for axial methylcyclohexane in
>>> chloroform
>>> along the lines of Tutorial A2 with Amber9.
>>>
>>> Equatorial methylcyclohexane also run successfully for 10,000 steps.
>>> When I
>>> attemped to double nstlim (20,000), run bombed because QM region +
>>> cutoff
>>> (8.0)
>>> larger than box (15.0). I repeated the run, instead of two
>>> consecutive 10,000
>>> steps, just a single run of 20,000 starting from where the
>>> 10,000-step run
>>> had
>>> been successful. Same error bombing. out file for the latter run
>>> attached. I
>>> can't grasp where my error is.
>>>
>>> An additional query: I was unable to delete chloroform from VMD.
>>> Curiously,
>>> if
>>> I indicate to show carbon only, this is shown correctly for the
>>> methylcyclohexane molecule, while chloroform is shown as an ammonia-like
>>> umbrella with four identical atoms. I.e., chlorine is shown as if it
>>> were
>>> carbon. Should I select a color for chlorine? I was unable to trace
>>> where to
>>> deal with chlorine atom. I used the chloroform box in Amber9.
>>>
>>> All that because I am checking convergence for ESCF with a simple test,
>>> flexible molecule.
>>>
>>> Thanks
>>>
>>> francesco pietra
>
--
M. L. Dodson
Email: mldodson-at-houston-dot-rr-dot-com
Phone: eight_three_two-five_63-386_one
-----------------------------------------------------------------------
The AMBER Mail Reflector
To post, send mail to amber_at_scripps.edu
To unsubscribe, send "unsubscribe amber" to majordomo_at_scripps.edu
|