AMBER Archive (2007)

Subject: Fwd: RE: AMBER: Average potential energies and conformer ratios

From: Francesco Pietra (chiendarret_at_yahoo.com)
Date: Wed Aug 01 2007 - 08:58:02 CDT


Posted again for a specific question as to Ross' suggestions:

Looking at prepin files from antechamber, partial charges differ at the second
decimal (sometimes at the first decimal) for the two conformers. Should an
average of the couple of partial-charge values for each atom be used to build
manually a new prepin file in view of long MD simulations devised at converting
conformers? In that case, the inpcrd files would be for an "averaged"
hypothetical species, while MD should result in "real" species.

Thanks

francesco pietra

--- Francesco Pietra <chiendarret_at_yahoo.com> wrote:

> Date: Mon, 30 Jul 2007 22:09:02 -0700 (PDT)
> From: Francesco Pietra <chiendarret_at_yahoo.com>
> Subject: RE: AMBER: Average potential energies and conformer ratios
> To: amber_at_scripps.edu
>
> Hi Ross:
>
> Thanks for all advice, which I'll follow, step by step.
>
> NMR spectra show two conformers in population ratios that depend on the
> solvent
> (without correlation with the dielectric constant value of the solvent), the
> best balance (80:20) in CHCl3, H2O and TFE, the worse (96:4) in EtOH and
> DMSO.
>
> CD spectra are also strongly dependent on the solvent. Unfortunately, neither
> 1D nor 2D NMR was able to give a measure of the dihedral angles along the
> chirality axes, from which CD mainly depends. Therefore, what I am trying to
> simulate are the conformers in the given solvent, and I am interested in
> their
> population ratio under the field of the solvent. I started from water not
> only
> because it is the basic solvent in MD, but also because interaction of these
> molecules with pharmaceutically-relevant receptors was investigated (not
> published) in this medium. Once I understand MD better (which is still the
> very
> problem for me) I plan to examine the system also in explicit DMSO, CHCl3,
> EtOH, etc. I'll rely on R.E.DD.B./R.E.D. III for solvent models.
>
> I am also interested in examining the solvation around my conformers,
> particularly around an amide side chain. I have no idea how (and if) that
> could
> be done. What I know so far with VMD is limited to "all" and "all not water".
>
> Cheers
>
> francesco pietra
>
>
> --- Ross Walker <ross_at_rosswalker.co.uk> wrote:
>
> > Hi Francesco,
> >
> > > PM3ESCF= -259.7765
> > > PM3ESCF= -257.1894
> >
> > > Judging from QM-MM PM3ESCF, a difference of 2.59 kcal/mol
> > > between the two
> > > conformers is not too far from the experimental value (NMR)
> > > of ca 1.9. Though -
> > > after what you explained in detail for this type of system -
> > > is that average
> > > /\PM3ESCF an estimate on which to rely?
> >
> > This is a tricky one. The key is whether the contributions to the ESCF
> > energy cancel out so that what you recover when you take the difference of
> > the averages is the difference between the average conformer one energy and
> > the average conformer 2 energy within solvent. I.e. does all the 'noise'
> > from the water etc cancel out. I'm really not sure on this as it would take
> > working through all the equations to determine this for sure. Maybe others
> > on the list can chime in here. One key point if you wanted to use such
> > analysis would be to write to the output file more often and calculate a
> > cummulative average that you then plot. This would tell you if the average
> > was converging or not. At the moment you have no idea if you have done
> > enough sampling or not - I.e. take the cumulative average every 100 steps
> or
> > so and see what the fluctuation in this average is with time.
> >
> > Do you know what the experimental NMR value was actually measuring?
> >
> > Ultimately it might be better to do some form of thermodynamic integration
> > where you convert one conformer into the other or make one vanish and the
> > same with the other.
> >
> > > I am at Amber just to have dynamics. I have already carried
> > > out DFT at high
> > > functional and basis set level, including vibrational
> > > analysis and temperature
> > > correction, all in vacuum.
> >
> > Okay, so this makes sense then since here you are obtaining solution phase
> > data - I would certainly start by running longer simulations - you likely
> > want at least 100ps or so I would guess although as above it would be
> > important to look at the average energy as a function of time. You might
> > want to try reposting this message along more general lines about what you
> > can learn by comparing average potential energies since a number of people
> > who might be able to offer more insight might be skipping this thread
> > thinking it is specific to QM/MM but really the same argument here would
> > apply to a classical simulation although the "noise" on EPTOT may be so
> > large that you need a significant amount of sampling to obtain an accurate
> > difference. This is the "noise" that may be cancelling out when you just
> > look at the ESCF value.
> >
> > Good luck...
> >
> > Ross
> >
> > /\
> > \/
> > |\oss Walker
> >
> > | HPC Consultant and Staff Scientist |
> > | San Diego Supercomputer Center |
> > | Tel: +1 858 822 0854 | EMail:- ross_at_rosswalker.co.uk |
> > | http://www.rosswalker.co.uk | PGP Key available on request |
> >
> > Note: Electronic Mail is not secure, has no guarantee of delivery, may not
> > be read every day, and should not be used for urgent or sensitive issues.
> >
> >
> > -----------------------------------------------------------------------
> > The AMBER Mail Reflector
> > To post, send mail to amber_at_scripps.edu
> > To unsubscribe, send "unsubscribe amber" to majordomo_at_scripps.edu
> >
>
>
>
>
>
>
____________________________________________________________________________________
> Looking for a deal? Find great prices on flights and hotels with Yahoo!
> FareChase.
> http://farechase.yahoo.com/
>

       
____________________________________________________________________________________
Got a little couch potato?
Check out fun summer activities for kids.
http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz
-----------------------------------------------------------------------
The AMBER Mail Reflector
To post, send mail to amber_at_scripps.edu
To unsubscribe, send "unsubscribe amber" to majordomo_at_scripps.edu